 |   |
|
|
|
|
Global Parameters
Air temperature: 20°C
Air pressure: 101325 Pa X Axis: Frequency Range: 20Hz - 20000Hz Scale: logarithmic Resolution: medium Angle of incidence: 45° Porous model: Komatsu (2008) Helmholtz model: Ingard/Allard |
Absorber Parameters
• Absorber 1 (250mm rockwool flexi-a)
250mm Porous Absorbent, 9000 Pa.s/m2 Rigid backing • Absorber 2 (250mm Rockfon industrial) 250mm Porous Absorbent, 21400 Pa.s/m2 Rigid backing • Absorber 3 (15cm rockfon med 10cm luft) 150mm Porous Absorbent, 21400 Pa.s/m2 100mm Air Rigid backing • Absorber 4 (10cm rockfon med 15cm luft) 100mm Porous Absorbent, 21400 Pa.s/m2 150mm Air Rigid backing |
Absorber 1: Peak absorption at 5187Hz. Damping=1.34 (high)
Absorber 2: Peak absorption at 12333Hz. Damping=1.34 (high)
Absorber 3: Peak absorption at 12333Hz. Damping=1.34 (high)
Absorber 4: Peak absorption at 12335Hz. Damping=1.34 (high)
Dotted lines indicate that the model used to estimate absorber properties has been used outside of its applicable range. Results may therefore be less accurate than where a solid line is displayed.
Absorber 2: Peak absorption at 12333Hz. Damping=1.34 (high)
Absorber 3: Peak absorption at 12333Hz. Damping=1.34 (high)
Absorber 4: Peak absorption at 12335Hz. Damping=1.34 (high)
Dotted lines indicate that the model used to estimate absorber properties has been used outside of its applicable range. Results may therefore be less accurate than where a solid line is displayed.